Видео

Qué va chamo, no me pude concentrar en el vídeo, esa blusa roja me distrajo mucho, 😉

I would have thought connecting a power cable and data cable would have been part of the process.

You do such great, artistic work.

👏👏👏👏🌹

Beautiful work, my friend! What a great video demonstrating the exothermic reaction. Very cool!

I just found and subscribed to your channel! Great looking box and video! 😎✌️

Really neat design. Very beautiful box. Thank you for sharing .

If I were shortening my 5" sides to 4" after the inlays, I would call it a "design change", not a mistake:)

Nice video. Thanks for the review. Just wanted to point out that once the board passes the cutterhead and starts touching the outfeed table, you should ONLY push the part on the infeed. Never push on the outfeed side since the slightest downward pressure may flex the board causing the infeed side to go upward, and you get inaccurate results. The outfeed table acts as a reference surface and pushing board against it defeats the purpose.

I purchased the F1 Ultra, mainly for Coin Embossment... and the quality isn't there compared to other fiber lasers.

What's your other channel

Étand visuel, j'apprécie beaucoup quand je peux voir ce que tu inscrit comme ommandes avant gravure. Merci!

Hi Skyler I just seen this video but I ordered that box a week ago it is going to be here on July 5 and I’m going to try to make some of the boxes that you have shown on your videos I enjoy your videos

You probably already know this, but paint the board ends with acrylic paint to prevent cracking (or use a commercial coating) and let them dry in your shop to the desired moisture content.

I love this video, thank you Skyler for always striving for a better more affordable product. 👍

Awesome, that turned out beautiful. Thank you for sharing your talent.

Skyler, Richard here. I have a quick question I make boxes like you do. I do some charcuterie boards and cutting boards and other small wood projects. I really want to buy a laser and I’m trying to figure out which would be best the F1 or the S2 right now I don’t think I have a need to cut out wood, I am also a scroll saw lover. you have so many lasers. What do you think would be my best choice?

I know nothing about woodworking. Why buy wood like this rather than dimensional lumber?

It's difficult to see anything but epoxy on the final products. The wood is not prominent.

Wow beautiful boxes, very niiice. I had some questions but other videos you have here answered them. Thank You for sharing. Just seen a new finish on Stumpy Nubs channel you might like also, just the fact that it can dry in 2 minutes wow an like a poly. Anyway loved your video here and your channel.

Very niiice, beautiful boxes, one of the new boxes at the end of the video had a slight angle on the top of the box an on the lid, just wondering what you used on them table saw or router also ? Thank you

What number speed you use please🙏

very helpful and it looks amazing, cheers

Love your channel and what you create! I think I figured out your 2 jig problem. I made the diamond jig and was thinking about how to improve to the other shapes jig. Then it hit me, how to use the diamond jig for both. All you have to do is put a piece of your shaped stock between the blade and the fence to get the width, lock your fence and take out the stock. Now you can make the other patterns and take them out just like the diamonds. Also you do not have to guess at width.

they look amazing and I'm so glad you didn't burn the house or shop down, cheers

Yes WOW thats very nice the inlay how to very niiice and the fact that you shared your mistakes won me over to your channel. Going to try my first box soon. Thank you for this. By the way, beautiful boxes !

1. Be female 2. Show cleavage 3. Profit

Nice boooards. Wow I'm struggling here lol you don't make it easy <3

Looks good

You should have saved the hardware off of those clamps

Your wisdom rails through my senses and great respect follows, experience is priceless ❤😮!

It looks great good job. So you might have said in past of not but where is a good place to get the molds thanks

To anyone new please take caution. Epoxy can be wonderful, but EXTREMELY dangerous. Epoxy contains a chemical called b.a.d.g.e. No epoxy is safe and any marked bpa safe is full of crap and still contains dangerous levels. Make sure to take care and let anything cure longer than what companies say. Badge can become airborne and get everywhere. Clothes , lungs, ext and harden where it lands. Please take caution heavily using any epoxy. Keep safety in check and always wear respirators, and more so when sanding. Stay safe❤

I just looked at Designer Epoxy’s Deep Pour. $217 for three gallons plus 10 mica powder color packs and free shipping to Canada and the lower 48. I use it all the time and have had zero problems.

Wow, what a great video. I’m glad that you mixed the two different resins together. I use them both and as you’ve mentioned, there are pros and cons to each. I like what happened in the video. The exothermic reaction was very nice! You are shaking up the resin artistry world!

Cook Woods. Klamath Falls Oregon. They do all their own cutting and kiln drying, instead of just reselling like some of these fly-by-night outfits. An impressive selection and usually have olive wood on hand.

Skyler, that’s a very nice one!

Please wear gloves at the very least. These are not things you want to be in direct contact with. I worked with epoxy and resin (more than using it as art). You can develop some nasty cancers from this stuff especially when not using PPE

I addmitt, I have been watching your older videos. I'm a very observant man , I noticed your fingernail upgrade. I have an off topic question for you. What wildlife do you typically see in your area ?